Velleman CS6MX Instrukcje Operacyjne Pobierz pdf (Strona 4)

Follow these simple steps to start using the CS6MX within minutes:

1) Insert the lower stem into the upper stem (rst press in the spring clip).

2) Twist the locking device so that the stem is locked at the required length.

3) Coil the search-head lead around the stem.

4) Plug the search-head lead into the socket on the control box.

5) Remove the battery compartment cover by loosening the four retaining screws.

6) Fit 8 x AA batteries to the battery holder being careful to observe polarity

and good contact and replace cover.

7) Rotate the Iron Volume control to number 8 on the scale.

8) Rotate the Disc control to number 4 on the scale.

9) Rotate the Disc Volume control to number 8 on the scale.

10) Set the Ground Control to ‘AUTO’.

11) Switch on and rotate the Sensitivity control to number 8 on the scale.

12) START DETECTING... Good metal targets give a sharp, high pitched audio

signal from the loudspeaker... Targets that have been discriminated will be

identied by a low tone tone... Signals from small pieces of iron are ignored...

Switch to pinpoint to identify the exact position of the target.

Rapid start

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Velleman CS6MX Instrukcje Operacyjne Strona 4