Velleman MP25FMU Instrukcja Użytkownika Pobierz pdf (Strona 5)

V. 02 – 20/10/2014

9 cover

10 M button

6. Batteries

Do not puncture batteries or throw them in fire as they may explode. Do not attempt to recharge

non-rechargeable batteries

(alkaline). Dispose of batteries in accordance with local regulations. Keep

batteries away from children.

When broadcast power becomes insufficient, replace the batteries with 8 new ones.

Note:

always replace all the batteries at once.

1. Put the megaphone in stand-

by mode (mode switch

locked, broadcast trigger [5]

not pressed).

Release the battery compartment lock

3. Take out the battery holders [8]

and remove the batteries.

4. Insert

8 new 1.5V C batteries (LR14C, not incl.) in the holders (4 per holder) in accordance with the polarity

markings printed on the holder. Hold the battery holders with the rimmed edges down, so the batteries do

not fall out. Only use batteries of the same ty

Place the battery holders back into the battery compartment, rimmed edges first, and following the polarity

markings inside the compartment.

6. Close the cover [9]

and push the battery compartment lock

7. Operation

Using the Speak function

Warning:

Never point the cone directly to people or animals at

permanent ear damage may occur.

Place the mode switch in the SPEAK position.

Point the cone towards the audience.

Take the microphon

e and press and hold the speak button, then speak in the microphone.

You can also press and push the speak button upward to lock it in the speak position.

Note:

the closer the sound source to the microphone, the better the sound.

3. Adjust the volume if neces

sary: turn the volume control wheel upward to increase the volume. Turn it

downward to decrease the volume.

Release the speak button to end broadcast.

Using the Siren function

Place the mode switch in the SIREN position.

Point the cone towards the audience

Press the trigger to sound the siren.

4. Release the trigger to end.

Playing a sound file from a USB s

tick or SD

Place the mode switch in the USB/SD position.

The LED indicator lights up when using a device with usb,

2. Connect a USB stick

or an SD card to the device.

You can also connect a device through the AUX input.

Press the M button to select the source.

Press the play button to play the file.

To skip to the next track, press button

To return to the previous track, press

To increase the volume, press and hold

To reduce the volume, press and hold

8. Cleaning and M

aintenance

•

All screws should be tightened and free of corrosion.

•

Wipe the device regularly with a moist, lint

•

The housing and visible parts should not be deformed or tampered with.

•

There are no user serviceable parts. Contact your dealer for spare parts if necessary.

•

Remove the batteries from the device if it will not be used for a long time.

and damage the device.

MP25FMU

microphone speak button

microphone volume control

Do not puncture batteries or throw them in fire as they may explode. Do not attempt to recharge

(alkaline). Dispose of batteries in accordance with local regulations. Keep

batteries away from children.

When broadcast power becomes insufficient, replace the batteries with 8 new ones.

always replace all the batteries at once.

by mode (mode switch

[4]

set to SPEAK; speak button

not pressed).

Release the battery compartment lock

[7] and open the cover [9].

and remove the batteries.

8 new 1.5V C batteries (LR14C, not incl.) in the holders (4 per holder) in accordance with the polarity

markings printed on the holder. Hold the battery holders with the rimmed edges down, so the batteries do

not fall out. Only use batteries of the same ty

pe and brand.

Place the battery holders back into the battery compartment, rimmed edges first, and following the polarity

markings inside the compartment.

and push the battery compartment lock

[7]

down until it is secure

Never point the cone directly to people or animals at

close distance (<10m); temporary or

Place the mode switch in the SPEAK position.

Point the cone towards the audience.

e and press and hold the speak button, then speak in the microphone.

You can also press and push the speak button upward to lock it in the speak position.

the closer the sound source to the microphone, the better the sound.

sary: turn the volume control wheel upward to increase the volume. Turn it

downward to decrease the volume.

Release the speak button to end broadcast.

Place the mode switch in the SIREN position.

Point the cone towards the audience

Press the trigger to sound the siren.

tick or SD

card

Place the mode switch in the USB/SD position.

The LED indicator lights up when using a device with usb,

sd card or aux.

or an SD card to the device.

You can also connect a device through the AUX input.

Press the M button to select the source.

Press the play button to play the file.

To skip to the next track, press button

[15].

To return to the previous track, press

button [14].

To increase the volume, press and hold

button [15].

To reduce the volume, press and hold

button [14].

aintenance

All screws should be tightened and free of corrosion.

Wipe the device regularly with a moist, lint

-free cloth. Do not use

alcohol or solvents.

The housing and visible parts should not be deformed or tampered with.

There are no user serviceable parts. Contact your dealer for spare parts if necessary.

Remove the batteries from the device if it will not be used for a long time.

Old batteries can begin to leak

©Velleman nv

Do not puncture batteries or throw them in fire as they may explode. Do not attempt to recharge

(alkaline). Dispose of batteries in accordance with local regulations. Keep

set to SPEAK; speak button

[19] not pressed or

8 new 1.5V C batteries (LR14C, not incl.) in the holders (4 per holder) in accordance with the polarity

markings printed on the holder. Hold the battery holders with the rimmed edges down, so the batteries do

Place the battery holders back into the battery compartment, rimmed edges first, and following the polarity

down until it is secure

close distance (<10m); temporary or

e and press and hold the speak button, then speak in the microphone.

You can also press and push the speak button upward to lock it in the speak position.

sary: turn the volume control wheel upward to increase the volume. Turn it

alcohol or solvents.

There are no user serviceable parts. Contact your dealer for spare parts if necessary.

Old batteries can begin to leak

1 2 3 4 5 6 7 8 9 10 ... 20 21

Komentarze do niniejszej Instrukcji

Brak uwag

Velleman MP25FMU Instrukcja Użytkownika Strona 5

Komentarze do niniejszej Instrukcji