Velleman CAMCOLD12N Instrukcja Użytkownika Pobierz pdf (Strona 3)

CAMCOLD12N

08.02.2010 ©Velleman nv

4. Installation

• Turn the plastic dome cover counter clockwise and remove it.

• Use the base to determine the location of the mounting holes and hole for

the video/power cable.

• Screw the base in place using 4 screws and connect the

video/power cable. There’s only one way to fit the

connector, do not force.

• Connect the video [1] and power cable [2].

• Aim the camera and close the dome. Align the

protrusions and notches, insert and rotate the plastic

cover ±60° clockwise. Make sure the camera has a clear

view.

5. Technical specifications

pick-up element 1/3" CCD

pixels 753(H) x 582(V) -PA

horizontal resolution 500 TV lines

min. illumination 0.1 lux / F2.0

S/N ratio > 48dB (AGC off)

electronic shutter 1/60 (1/50) to 1/100000s

lens f3.6mm / F2.0

lens angle 79°

iris mode AES

gain control auto

white balance ATW

video output 1Vpp @ 75 ohms

power supply 12VDC / 110mA (use PS1205R, not incl.)

dimensions Ø100 x 60mm

weight 130g

Use this device with original accessories only. Velleman nv cannot

be held responsible in the event of damage or injury resulted from

(incorrect) use of this device. For more info concerning this product,

please visit our website www.velleman.eu. The information in this

manual is subject to change without prior notice.

This manual is copyrighted. The copyright to this manual is owned

by Velleman nv. All worldwide rights reserved. No part of this manual may

be copied, reproduced, translated or reduced to any electronic medium or

otherwise without the prior written consent of the copyright holder.

1 2 3 4 5 6 7 8 ... 20 21

Brak uwag

Velleman CAMCOLD12N Instrukcja Użytkownika Strona 3